Basic parameters that customers need to provide when customizing springs-Anhui Zhongteng Auto Parts Co., Ltd.-Auto parts production

Home

Basic parameters that customers need to provide when customizing springs

Release time:

Mar 07,2023

In short, in the process of customizing the spring, you must let the spring manufacturer know the details of your spring parameters. If you only have a rough spring requirement and do not have specific parameters, you can also contact us and describe the spring function and spring working environment you need to us. We will design it for you free of charge according to your requirements.

In the process of customizing torsion springs, customers are required to provide us with the parameters of the springs, as follows:

(1) Free length.

(2) Controlling diameter: (a) outside diameter, (b) inside diameter, (c) inside diameter of the casing, or (d) outside diameter of the rod through which it passes.

(3) Wire size: “wire diameter”.

(4) Material (type and grade).

(5) Number of turns: (a) total number of turns and (b) right-hand or left-hand.

(6) Torsional force: The number of pounds required to deflect to a certain angle.

(7) Maximum deflection (angle measured from the free position).

(8) The form of the terminal.

keywords

Development of spring processing technology

Where can springs be used in daily life?

:Next Page

Development of spring processing technology

Where can springs be used in daily life?

2023.03.07

Common materials for cold-formed springs

The common materials of cold forming springs can be divided into the following types according to the different heat treatment processes after forming. Anhui Zhongteng Auto Parts Co., Ltd.

2023.03.07

Introduction to the basics of spring stainless steel

A high alloy steel that can resist corrosion in the air or chemical corrosive media. Stainless steel has a beautiful surface and good corrosion resistance. It does not need to be plated or other surface treatments, but gives full play to the inherent surface properties of stainless steel. It is a kind of steel used in many aspects and is usually called stainless steel. Representative high alloy steels include 13-chrome steel, 18-chrome-nickel steel, etc.

2023.03.07

Introduction to the six functions of springs

We know that within the elastic limit, the extension (or contraction) of the spring is proportional to the external force. This property of the spring is used to make a spring balance.